Change Belt on 8141-8142

How to Change Belt on the Hobart 8141-84141-8142-84142 Buffalo Chopper

 

REPLACING BELT ON OLD BUFFALO CHOPPERS 8141-84141-8142-84142

 

THIS IS THE STARTING POINT FOR CHANGING THE BELT ON THE OLD HOBART BUFFALLO CHOPPERS. TAKE OFF THE LID & BOWL AND THE KNIVES SEE THE FOUR SCREWS WERE THE SHAFT COMES OUT OF THE MACHINE REMOVE THEM

 

NEXT YOU HAVE TO UNSCREW THE KEEPER NUT YOU WILL SEE I HAVE A PUNCH TO TAP IT COUNTER CLOCKWISE THAT WILL JUST UNSCREW A LITTLE RUSTY BUT THESE ARE OLD MACHINES

NOW THAT THE KEEPER NUT HAS BEEN REMOVED YOU HAVE THE FRONT HALF OF THE PULLEY REMOVE THE SAME AS ABOVE TAP COUNTER CLOCKWISE AND REMOVE IT

AFTER YOU REMOVE THE OUTSIDE OF THE PULLEY YOU NOW CAN SEE THE BELT

 

 

NOW YOU WILL HAVE TO REMOVE THE SAFTEY PAN ON THE BOTTOM OF THE MACHINE AND THERE IS THE UNDERSIDE OF THE BELT
PLEASE NOTE SOME MACHINES DO NOT HAVE THE PAN DO NOT LET THIS BOTHER YOU

 

NOW JUST TAKE BELT OFF THE PULLEY AND PUSH IT TO THE TOP OF MACHINE

 

NOW JUST TAKE OFF BELT BY SLIDING THRU THE TOP AND PUT ON NEW BELT AND REVERSE TH WHOLE PROCEDURE I KNOW MOST BELT CHANGES ARE MADE WHEN THE OLD BELT WEARS COMPLETELY OUT AND BREAKS BUT YOU WILL STILL HAVE TO GO THRU THIS PROCEDURE

No articles.